Re: [libreoffice-users] Printing with HP 960C Deskjet

Hi :)
Upgrading LO to 4.0.x sounds like a good plan, as does 
File - "Export to Pdf" 
and then print the Pdf through whatever you view Pdfs with.  

Errr i only had a go on 1 Macbook once and i wasn't able to fully explore it.  it was quite a big 
deal for me as it's been about a decade since i last used a Mac.  I have seen quite a few people on 
these mailing lists deal with Mac issues and documentation is pretty good at providing a conversion 
table to deal with a couple of issues.  So i listen to other people and copy&paste parts of their 
previous answers if it seems appropriate.  These lists are great for learning tons of useful stuff 
or just increasing understanding general understanding.  

As Tim said Mac is kinda a brother or sister of Gnu&Linux so advice based on one might help with 
the other but there are some odd differences between the platforms.  

The main problem seemed to be that because the drivers were built-in to OS X 10.5 it's very 
difficult to get hold of a package that is just the driver or installer.  However, i think the op 
has found 3 drivers that are almost right but just not quite there.  Perhaps upgrading LO might 
help them.  
Regards from 
Tom :)  





> ________________________________
> From: Kracked_P_P---webmaster <webmaster@krackedpress.com>
> To: users@global.libreoffice.org 
> Sent: Wednesday, 17 July 2013, 5:03
> Subject: Re: [libreoffice-users] Printing with HP 960C Deskjet
>
>
>
> For now, as a big work around. . .
> Do you have "luck" printing a PDF file to the HP 960?  If so, then just 
> export to PDF and print that file.  That will work till we get the 
> direct printing from LO issue fixed.  For the longest time, that was 
> what I did to print a duplex document on the Epson printer.
>
>
> Do you have the ability to use the OSX 10.5 driver?  Or the more generic 
> 10.1.5 to 10.4.x driver?
>
> HP has those drivers on their web site for download.
>
> I am not a Mac person, but since it is "sort of" a Linux-like OS
> [do not tell me how it is not a Linux OS, since I am using a generic 
> comparison]
> then there must be a way to install this older driver and use it.
>
> I know that for Linux and Windows, drivers for earlier version of the OS 
> can work, most times, when there is no newer version for the newer OS.  
> I have used 10.04 and 11.x drivers for my Ubuntu system when there has 
> not been one made for my 12.04 version of the OS.  Actually I have done 
> that with several packages.  So I am hoping that the 10.5.x driver would 
> work on a 10.7 OSX, since there is none listed for 10.6 or 10.7.
>
> Also, LO 3.4.1 may not be the best version for your needs.  I had a lot 
> of trouble with dialogs and duplex printing till the 3.6.x line.  I use 
> 4.0.4.2 on a Linux system at this time.  So it is possible for you to 
> download and install the 3.6.6 version or the 4.0.4 version for OSX and 
> see if some of your dialog issues are fixed.
>
> To get duplex working on all my duplexing printers [HP laser, Canon 
> inkjet, and Epson inkjet] I had to check the "use LO dialog" option for 
> the print dialogs.  That was listed as an option for Linux but did not 
> show up for the Windows version.  So I would expect that the OSX version 
> might have some different dialog options.  Before I found that "Linux 
> only" option, no one could figure out how to get my Epson printer to 
> duplex when my HP laser would.  Now I have a Canon inkjet and the check 
> box option works with that duplexing printer as well.
>
> I know that Tom is a Linux person, but he has access to Mac systems, so 
> he may know some OSX specific option, but I have used 3 duplexing 
> printer and I know what works for me.
>
>
>
>
> On 07/16/2013 07:26 PM, Tom Davies wrote:
> > Hi :)
> > 2 approaches to fix this, i've not thought about which should be number 1
> >
> > 1.  To use the LO dialogues ...  When the printer dialogue-box pops-up note there are 4 tabs at 
> > the top.  On the 1st tab you should see a list of all the printers installed.  Select the Hp 960 
> > but instead of printing click on the "Properties" button.  It's just under the list.  The 
> > "Properties" pop-up also has a couple of tabs.  The 1st should be "Paper".  Duplex is about the 
> > 4h drop-down.  Long-edge for Portrait but Short-edge for landscape.  My boss can never figure 
> > out that short-edge refers to the shortest edge of the paper, or perhaps he is just being kind.
> >
> > 2.  To change to normal dialogues ...
> > LibreOffice - Preferences - General - "Print dialogues" - UNtick the tick-box that says "Use LO 
> > dialogues".
> >
> > Errr, are you sure that duplex is installed?  When you install the driver it should ask you if 
> > you want duplex to be included.  It might do it automatically.
> > Regards from
> > Tom :)
> >
> >
> >
> >
> >
> > > ________________________________
> > > From: Cliff Scott <cfly@intergate.com>
> > > To: users@global.libreoffice.org
> > > Sent: Tuesday, 16 July 2013, 22:29
> > > Subject: [libreoffice-users] Printing with HP 960C Deskjet
> > >
> > >
> > > Fellow LibreOffice users -
> > >
> > > I am running LO on a Mac, OSx 10.7.5 and the printer is a HP 960C Deskjet.
> > > There are no native OSx drivers for the 960C so I've loaded drivers from
> > > Guten Print, Hpijs and also an HP 9800. All three work fine with every OSx
> > > app including OpenOffice 3.4.1. In LO the print dialog does not use the
> > > normal OSx dialog that every other app uses, but has its own. That dialog
> > > does not allow me to select Dual sided printing or Print Quality other than
> > > Draft, among other missing, but not so important settings. Is there any way
> > > around this? Why does LO do its own thing and not use the normal dialogs? I
> > > have to have OpenOffice installed just to print properly. Very wasteful of
> > > time and resources.
> > >
> > > LO has fixed a number of things that are not fixed in OO so I'd much rather
> > > use LO all the way, except for this one issue.
> > >
> > > Thanks for any help.
> > >
> > > Cliff
>
>
> -- 
> To unsubscribe e-mail to: users+unsubscribe@global.libreoffice.org
> Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
> Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
> List archive: http://listarchives.libreoffice.org/global/users/
> All messages sent to this list will be publicly archived and cannot be deleted
-- 
To unsubscribe e-mail to: users+unsubscribe@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette
List archive: http://listarchives.libreoffice.org/global/users/
All messages sent to this list will be publicly archived and cannot be deleted